1. When operating the gear lever, be sure to fully press the clutch, then shift gears, and slowly release the clutch pedal.  

2. When not shifting gears, do not place your foot on the clutch pedal, otherwise it may cause excessive wear of the clutch or sudden power interruption.  

3. When parking on a slope, do not use the clutch to keep the vehicle parked, use the parking brake instead.  

4. Shifting gears too quickly or too slowly can cause deceleration during loading and may result in knocking sounds. If the engine is frequently rotated at the maximum speed of each gear, it will cause excessive engine wear and waste fuel.

Note:

·The gear shifting operation should be carried out on a flat road surface while the vehicle is driving. If shifting on a sharp turning road surface, it will cause side slip!

·Only when the vehicle is stopped can reverse gear be switched. When the engine is running, the clutch pedal should be fully depressed and wait slightly to avoid noise during gear shifting!

·Please do not slide in neutral while driving, otherwise accidents may occur!

·When the vehicle is driving forward normally, it is not allowed to suddenly shift into reverse gear, otherwise accidents may occur!